|
|
New
Fiero
Parts and Accessories Currently in Development
Are you tired of hearing about Fiero parts being discontinued?
Do you ever wonder what happens to the money you spend at The Fiero Store?
If the answer to either of these questions is "yes", we encourage you to bookmark this page.
Here you can see exactly how we are reinvesting your dollars back into the Fiero community.
Registered users have the ability to suggest new products among other benefits.
Register now
and let us know what products you think we should develop.
85-88 Aero Front License Plate Bracket
Reproduction front plate bracket that fits the aero GT/SE style front bumper cover.
85-88 V6 Coolant Tubes from T-stat to Throttle Body
Reproduction coolant tubes that run under the upper intake assy from the Throttle Body to the thermostat housing.
Decklid Engine Weatherstrip
This weatherstrip fits on the front lip of the rear decklid to divert water away from the exhaust manifold.
Rubber Door Glass Pillar Seals
These rubber seals attach to the door frame at the front and back of each door glass.
V6 EGR Spacer Block
Aftermarket heat coated replacement for the stock cast iron block underneath the V6 EGR valve.
84-86 Headlamp Motor Limit Switches
Replacement limit switches for 84-86 headlamp motors. No longer available new and very prone to failure.
86-88 GT Decklid Weatherstrip
Cost effective aftermarket replacement weatherstrip for the decklid on 86-88 GT models.
84-88 Ft Upper Cross-Member Brackets
New brackets to replace the commonly rusted units that bolt the top of the front cross-member to the chassis
85-88 4cyl Adjustable Shift & Selector Cables
Aftermarket replacement cables for 85-88 4cyl 5spds.
87-88 Headlight Motor Cover Gasket
Replacement gasket that fits between the headlight motor and side cover. This gasket may be needed when rebuilding your headlight motor.
Front & Rear Windshield Molding
Replacement molding that fills the gap around the front and rear windshields.
V6 EGR Spacer Gasket
Stock replacement gasket for the discontinued unit that fits between the V6 crossover pipe and the EGR spacer block.
Accelerator Pedals
Aftermarket reproduction accelerator pedals.
Seat Recline Handles
Aftermarket reproduction seat recline handles.
Sunroof Weatherstrip Track Bolts
Replacement bolts that hold the sunroof weatherstrip tracks in place.
V6 Fuel Block Spacer & Seal
Replacement spacer/seal that fits between the V6 fuel rail and the fuel inlet block.
Mud Flaps
Mud flaps with the word "Fiero" printed along the bottom of each flap.
Floor Mats with "Fiero" & "Fiero GT" Embroidery
Custom fit floor mats with the word "Fiero" or "Fiero GT" embroidered on them instead of the Fiero logo.
Sunroof Sunshade Storage Bag
Reproduction of the GM storage bag that held the sunroof glass and/or sunroof sunshade.
84-88 Indy/SE/GT Rocker Panels
New replacement rocker panels made with original GM tooling.
1988 Beechwood Interior Spray Paint
Color matched paint for the 1988 beechwood color interior panels.
86-88 GT NOS Decklid Vents
Brand new old stock vents that go on either side of the 86-88 GT decklid.
Additional Color Matched Interior Paint
The Fiero Store is working on 3 additional colors for the Fiero interior: Charcoal Gray, and 2 browns to match the darker portions of the dash.
85-88 V6 Vacuum Lines
Reproduction mild steel vacuum lines that run under the upper intake assembly.
Seat Upholstery
Factory seat upholstery has been on our mind since we had to discontinue them a few years back.
85-88 V6 Exhaust Manifolds
Aftermarket reproductions of the original V6 exhaust manifolds. If all goes well, due to arrive early 2009.
Fiero Part Release History
|
|
|
|
|
|